Industrial coatings & lubricants Technical selection overview
Specify the exposure, surface-preparation standard, target coating system, colour, application method and destination. ZINTEX will confirm whether THERM SI-1086 fits the project or propose a made-to-order alternative.
| Product family | Heat-resistant coatings |
|---|---|
| Material type | silicone heat-resistant coating |
| Binder family | silicone |
| Components | one-component |
| Suitable substrates | carbon steel |
| Typical project contexts | bridges and structural steel, oil and gas facilities, marine and port infrastructure |
Source technical parameters
| Dry film thickness | 30 - 70 µm |
|---|---|
| Impact resistance | 50 cm, min. |
| Adhesion | grade 2, max. |
| Density | 2.5 - 2.6 g/cm³ |
| Volume solids | 78 - 81 % |
| Drying time | 30 min, max. |
| Nozzle size | 0.013 - 0.017'' (0.33 - 0.43 mm) |
| Spray pressure | 10 MPa (100 bar) |
| Theoretical coverage | 180 - 420 g/m² |
Source values require project confirmation
Values are imported from the pinned source technical profile. Confirm the current approved product and batch documentation before application.
The accepted specification and current batch documentation govern application, performance and supply.
Before requesting a quotation
Provide the substrate, preparation standard, exposure, target system, colour, finish, application method, required quantity, packaging and destination. This lets technical and export review happen together.